Frequently Asked Questions |
PRODUCT QUESTIONS
Can door hinges be reversed?
Door hinges are not field reversible for the G3 series. However, you may pre-order any model with a factory reversed hinge for a nominal fee.
How do I adjust the parameters on my digital controller? To Change the Temperature: press SET, wait for flashing, press up or down to desired temperature, press SET again.
Set Automatic Defrost: Hold down Snowflake button and wait for click. The defrost cycle will run for 25 minutes.
Do the pizza prep tables and sandwich prep tables include the pans with my purchase?
Yes, the Pizza Prep Tables include 1/3 size pans and the Sandwich Prep Tables include 1/6 size pans. Pans are plastic and clear.
How does the shelf/pan slide system work?
We use a shelf slide system for our Reach-in and Pizza Prep Table Models. Both models incorporate stainless steel slides inside the cabinet on which wire shelves rest and be slid in and out. These stainless steel slides will accept 12” x 20” hotel pans. You may purchase wider slides to accommodate 18” x 26” sheet pans. Reach-Ins will accept 18 slide pairs per door opening. Pizza Prep Tables will accept 8 slide pairs per door opening.
How do I remove the protective plastic?
If the protective plastic becomes brittle in cold environments, heat the plastic with a hair dryer to easily peel back the protective plastic from the stainless steel.
Do Undercounter/Worktop models come with a backsplash?
We provide an optional 4” high backsplash for an additional cost for all of our Undercounter/Worktop models. Please call for prices.
INSTALLATION, MAINTENANCE AND CLEANING
How do I install my cabinet?
Installation is easy. After all packaging is removed, casters are tightly screwed in, and the unit is wiped down with mild soap and water simply plug your unit into a 115 V outlet. Check product details to see if a 15 amp or 20 amp outlet is needed. After plugging the unit in and turning the switch ON, you unit will experience a 3-5 minute delay prior to the compressor starting up The digital controller is running a quick safety analysis on all components. Let the unit run for 24 hours prior to adding any food product inside. Check the following to ensure optimal operation conditions:
A) Install cabinet on a level floor surface. If the floor is not leveling, you may experience water leakage from the evaporator drain pain into the cabinet.
B) Ensure that all cabinet air vents are not blocked and have proper ventilation. We suggest 4 inches on all sides.
C) Ambient room temperature should not exceed 90 F and 50% relative humidity.
D) If possible, install your cabinet in the coolest area of your kitchen, away from cooking equipment.
How do I clean and protect my cabinet?
Clean the interior of the cabinet with a mild soap and water mixture on a regular basis. A stainless steel cleaner may be applied to the exterior of the refrigerator or freezer. Do not wipe the digital controller with the stainless steel cleaner or it may tarnish the plastic screen.
How do I regularly maintain my refrigerator or freezer?
A) Most importantly, you must clean the condenser coil at regular 4 week intervals. The condenser coil is located on the back or side of the cabinet, next to the compressor. Remove all lint, dirt and grease from coil fins. If you fail to do this on a regular basis, air will not pass through the coils. This will cause your compressor to overheat, interior temperatures to rise, and if a service problem occurs, it may void your warranty.
B) Follow the cleaning instructions for maintaining the exterior and interior appearance.
FREIGHT DAMAGES AND CHARGES
The freight company damaged my unit. What should I do?
Do not sign for the unit! Call Migali immediately for instructions on how to proceed! 1.800.852.5292
There is concealed freight damage that I did not see until I signed for and unpackaged my unit. What should I do?
A) Hold on to the crate and packaging. Do not throw it away.
B) Take pictures of the concealed damages and email them to contact@migali.com
C) Call Migali at 1.800.852.5292 for instructions on how to proceed.
ORDERING PARTS
How do I order replacement Parts?
You may buy parts directly through Migali or through our parts distributors. If you decide to buy through Migali, please contact the parts department at extension 14.
The parts department will request the following information from you if you do not already have an account set up.
A) Faxed order to the parts department. Fax: 856.963.3604
B) Faxed copy of your company’s re-sale certificate or tax ID information
C) Form of payment: We accept only Master or Visa Card
D) Parts ship between 5-7 business days
E) You can also email this information to dmigali@rcn.com.
SERVICE & WARRANTY
My cabinet is still under warranty and I have a service issue. What do I do?
Call the Migali warranty line at extension 13. Have the following information at hand.
A) Cabinet Model & Serial Number
B) If you have never registered your cabinet with Migali, we will request a proof of purchase or a copy of the original invoice showing the date in which you purchased your unit. Your cabinet must be registered before proceeding with a warranty claim. Click here for a Warranty Registration Form.
What is my warranty?
The standard G3 Series Warranty is 1 year parts + labor and 5 years compressor. The warranty begins at the date of installation or 90 days after purchasing the cabinet, whichever comes sooner.
Can I buy an extended warranty plan?
Yes, call Migali at 800.852.5292 for details. This is only available prior to purchasing your new Migali unit.
What is covered and what is not covered under my warranty?
The following items are covered under the G3 Warranty Protection Plan:
Compressor:
Hermetically Sealed Compressor
Parts:
Compressor starting components (Capacitor, Overload, and Relay), Evaporator and Condenser Coils, Evaporator and Condenser Motors, Fan Blades, Drier Filter, Capillary Tubes, Thermostats, Temperature Displays, Timers, Refrigerants including 404a and 134a (limited to the full charge amount (oz) listed on the model serial tag), Drain Line Heater Wires, Condensate Heating Elements, Evaporator Defrost Rods.
Labor:
Service necessary for the malfunctioning of any parts listed above under normal operating conditions to be reimbursed according to Migali Labor Guideline Form.
Freight:
UPS freight charges will be prepaid by Migali if the defective compressors or parts are diagnosed as defective within (365) days of the warranty registration date. Migali pays UPS ground charges only. All other expedited freight charges are the responsibility of the owner/operator.
The following items are NOT covered under the G3 Warranty Protection Plan:
Compressor:
Compressor or compressor parts deemed defective through improper maintenance and cleaning, incorrect or low voltages, GFI related and electrical surge issues, or improper installation of the refrigeration unit.
Parts:
Door Gaskets, Door or Lid Handles, Body of the Refrigeration Unit, Casters, Door or Lid Hinges, Door Opening Breaker Caps, breakage of any parts due to improper use such as standing on the refrigerator or mishandling damages.
Labor:
Water or humidity inside or outside of unit (unless deemed by agent due to defective heating element), Clogged evaporator drains, Readjusting or leveling of unit, Iced evaporator coil due to temperature controls set too low, Problems caused by improper maintenance, Issues caused by improper installation or negligence of operator.
Freight:
UPS freight charges must be paid by the owner/operator if any parts or compressors are diagnosed as defective (365) days after the registration date.
TROUBLESHOOTING
Go to our Manuels for all Troubleshooting Questions:
Reach-Ins
Pizza and Sandwich Prep Tables
Undercounter and Worktops
|
